Renovation

The True Cost of Buying a Renovation Property

The property that looks cheap is often the one whose costs have not been counted yet. This is how to count them before you offer, not after you own it.

Équipe éditoriale BuyerWingman12 min de lecture

Cet article n'est actuellement publié qu'en anglais.

Empty villa room mid-renovation with bare plaster walls, exposed conduit, ladder and dust sheets by a large window

Renovation properties attract buyers for a good reason: they are one of the few remaining ways to buy below the finished market price. The mistake is not buying them. The mistake is comparing the purchase price of an unrenovated house with the sale price of a renovated one and calling the difference an opportunity.

Acquisition costs before a single wall is touched

These are the costs of becoming the owner. They vary by jurisdiction and by whether the property is new or resale, but the categories are consistent.

  • Transfer tax or VAT on the purchase, depending on the property type and region.
  • Stamp duty or its local equivalent where applicable.
  • Notary fees for the deed of sale.
  • Land registry fees for recording the transfer.
  • Legal fees for your lawyer's conveyancing and due diligence work.
  • Mortgage arrangement costs, valuation fee and any lender charges.
  • Survey, architect's report and technical inspections commissioned before purchase.
  • Currency conversion costs where you are buying in a currency you do not hold.

In many European markets these items together add roughly 8–14% to the purchase price. Confirm the precise figures for your region with your lawyer — the range varies more than buyers expect, and it is the first line where an optimistic model goes wrong.

Technical and professional fees for the works

  • Architect's design and project documentation.
  • Technical director or site supervisor fees where required by law.
  • Structural or specialist engineering input.
  • Building licence fees and municipal works taxes.
  • Energy certification and any required compliance certificates on completion.
  • Project management, if you are not managing the site yourself from nearby.

Professional fees on a full renovation commonly run to a meaningful percentage of the construction cost. They also tend to be the first thing an inexperienced buyer leaves out of the spreadsheet entirely.

The works themselves

Build the works estimate by trade, not as a single number. A single number cannot be checked, challenged or updated as information arrives.

  • Demolition, strip-out and waste removal.
  • Structural works, openings and reinforcement.
  • Roof covering, insulation and waterproofing.
  • Terrace and below-ground waterproofing, drainage and damp remediation.
  • Electrical rewire, consumer unit, lighting design and data.
  • Plumbing, hot water and sanitary installations.
  • Heating, ventilation and air conditioning.
  • Windows, external doors and shading.
  • Kitchen, including appliances and installation.
  • Bathrooms, including fittings, tiling and waterproofing.
  • Internal walls, plaster, joinery, doors and built-in storage.
  • Flooring throughout.
  • Decoration internally and externally, including render repairs.
  • Pool refurbishment: shell, lining, plant, safety and compliance.
  • Landscaping, boundary walls, terraces, irrigation and external lighting.
  • Furniture, fittings and equipment, if the property must be usable on day one.
Dated villa kitchen awaiting renovation with worn cabinets, old tiling and daylight through shutters
A kitchen replacement is visible in a viewing. The rewire behind the wall is not.

Low, expected and high — why one number is never enough

Every renovation estimate should exist in three versions, each with a stated assumption behind it.

ScenarioCostWhat it assumes
Low€145,000Services largely sound, no structural surprises, mid-range finishes, no pool structural work
Expected€175,000Full rewire and replumb, terrace waterproofing, new kitchen and bathrooms, pool plant renewal
High€210,000Additional structural repair, roof replacement, pool shell works, higher specification
Illustrative renovation range — fictional figures for a dated four-bedroom villa

The gap between low and high is not indecision. It is an honest statement of what is not yet known — and it tells you how much of the deal depends on things going well.

Contingency is a line item, not an attitude

On a property whose fabric you cannot fully inspect until work begins, 10–20% contingency on the works budget is normal, and the older or wetter the building, the higher that figure should be.

Contingency covers the things that are genuinely unknowable in advance: what is behind the plaster, what the drains look like when opened, what the roof deck is doing under the tiles, and how much of the electrical installation can actually be reused. A budget without contingency is not a cheaper project. It is the same project with the risk transferred onto you.

Finance and holding costs

  • Mortgage interest during the renovation period, when the property produces no benefit.
  • Property tax, community fees, insurance and utilities while the house is empty.
  • Security, storage and site services during works.
  • Alternative accommodation if you cannot live in the property.
  • The opportunity cost of capital committed for the duration of the project.

A nine-month project has nine months of holding cost. A project that slips to eighteen months — which happens routinely when licences are involved — has eighteen. Model the timeline, not just the works.

A worked example: how a bargain disappears

Consider a fictional villa asking €995,500, where similar renovated properties nearby have sold around €1.15m. On the surface, the margin looks comfortable.

LineAmount
Purchase at asking price€995,500
Acquisition costs at approximately 11%€109,500
Technical and professional fees€24,000
Renovation — expected scenario€175,000
Contingency at 15% of works€26,250
Finance and holding costs over 12 months€32,000
Total committed€1,362,250
Illustrative total cost model — fictional figures

Against a finished value near €1.15m, the apparently attractive purchase is roughly €210,000 underwater before anything goes wrong. The property did not become bad. The price did.

Run the same model with a purchase at €790,000 and the picture changes completely: total committed lands near €1.13m, and the project becomes viable with a modest margin. Same house, same works, different entry price. That is the whole argument for pricing risk into the acquisition rather than hoping to absorb it later.

Building a total cost model

  • Get acquisition cost percentages confirmed for your specific region and property type.
  • Price the works by trade, with low, expected and high scenarios for each major item.
  • Add professional fees and licence costs as separate lines, not as part of the builder's quote.
  • Apply contingency of at least 10%, and more for older buildings or below-ground space.
  • Model holding costs against a realistic timeline, including licence waiting periods.
  • Compare total committed cost against evidenced finished value, not asking prices nearby.
  • Decide the maximum purchase price the model supports — and treat it as a limit, not a target.

When a renovation property is an excellent purchase

None of this argues against buying property that needs work. Renovation buyers control specification, quality and layout in a way that buyers of finished houses never do, and a well-run project can produce a home that no listing on the market could match.

But the economics only work when the acquisition price leaves room for realistic costs, honest contingency and the possibility that some things take longer than planned. The discipline is simple: decide what the property costs you in total, then decide what you will pay to acquire it.

BuyerWingman builds renovation ranges from the property's documented condition and photographs, links each cost line to the evidence behind it, and carries the result into the deal analysis — so the total cost model updates as the evidence does. If you are still assessing condition, start with the twelve red flags to check before offering.

Questions fréquentes

How much contingency should I allow for a renovation?
Ten to twenty percent of the works budget is a reasonable starting range. Use the upper end for older properties, buildings with below-ground rooms, anything with a damp history, and projects where you cannot open up the structure before committing.
What percentage do acquisition costs add to the purchase price?
In many European markets, roughly 8–14% once transfer taxes, notary, registry, legal and mortgage costs are included. The exact figure depends on region and property type, so confirm it with a local lawyer before finalising your model.
Should I get quotes before making an offer?
At least indicative ones. A builder or architect who has walked the property can give a range that is far more reliable than a per-square-metre rule of thumb, and the cost of that visit is trivial compared with the number it corrects.
Is per-square-metre renovation costing reliable?
Only as a first sanity check. It ignores the two variables that dominate real budgets: how much of the existing structure and services can be reused, and the specification level of the finish. Two houses of identical size can differ by a factor of three.
Do renovation costs affect what a bank will lend?
They can. Lenders generally value the property as it is today, not as it will be, so a large renovation typically has to be funded from your own capital or through a specialist product. That constraint belongs in the model from the start.
How long do renovation projects usually take?
Longer than the construction programme alone suggests. Licensing, design, tendering and material lead times often add several months before work starts. Model the full timeline, because holding costs run from the day you complete, not from the day the builder arrives.

Note éditoriale

Cet article constitue une information générale, et non un conseil juridique, fiscal, technique ou d'évaluation. BuyerWingman ne remplace pas un avocat, un architecte, un expert du bâtiment, un ingénieur, un conseiller fiscal ou un expert évaluateur agréé — il vous aide à aborder ces échanges mieux préparé.

Prêt à auditer un bien ?

Téléversez les informations du bien, les documents, l'annonce et les photos. BuyerWingman recoupe les preuves, signale ce qui ne concorde pas et vous aide à comprendre les faits et les risques avant d'acheter.

Articles liés

Retour à tous les articles